Drip bar profile 10 mm RIATHERM 2205 mm

Drip bar profile is installed at each end of the sheet, facing the gutter. The drip bar gives a neat finish to the multiwall polycabonate roofing sheet and ensures that the water runs down into the gutter.

The drip bar profile must be the same length and width of the multiwall polycabonate roofing sheet. It can be easily cut with a fine-toothed saw.

Put a silicone strip (use Multisil Silicone clear) 5 mm inside the top of the drip bar. Turn the drip bar around and press it over multiwall polycabonate roofing sheet's edge so the silicone is pressed against the sheet's upper side. In this way, the space between the drip bar and the multiwall polycabonate roofing sheet sheet is sealed so no water gets in the drip bar.

The drip bar profile is fastened with a stop bracket on all profiles. Put a silicone sealant around the stop bracket.

Colour: antirust aluminium

Installation guide

• Installation guide